Sun I/O Board with SOC+ Sun X2622A

Sun X2622A

The X2622A is an I/O board manufactured by Sun Microsystems. We gathered information from several on-line sources and complied it here. We hope you find it helpful. If you have any more useful information about this product, please let us know so we can add it to this site.

Compatibilities:

All Sun Microsystems parts are known by at least two numbers, the X-Option number and the Part number. The best way to find out what part you have is the BarCode. Every part that Sun Microsystems sells has a Sun bar-code. This bar-code has both the part number and serial number of the part. (The X-Option number is not located on the part.) Here is a sample Sun Barcode:

An X-Option may have multiple part numbers and a part number may have multiple X-Option numbers associated with it.

Need help finding out what part you have? Enter your part number here to search our database

Here are the X-Option numbers and Part numbers associated with the X2622A:

X-Options: X2622A

Part Numbers:

Sun X2622A

Notes:

1. The minimum Ex000 operating system is 2.5.1.
2. The minimum Ex000 OS is 2.5.1 HW: 11/97 if a GBIC is installed.
3. The minimum Ex500 OS is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
4. The Gigaplane runs at the speed of the slowest detected board.
5. The following cable types are supported:
   50/125 Multimode Fiber up to 500 meters
   62.5/125 Multimode Fiber up to 500 meters
6. All I/O boards within a system must be at the same firmware revision.
   When replacing an I/O board, confirm that the firmware version on the replacement matches the other I/O boards.

E4500, E5500, and E6500 SBus Notes:

1. Refer to Installation Guide 806-5239 to install Options 1098 and 1099.
2. SBus Blank Filler Panel 540-4566 of June 2000 is Option 1099.
3. SBus Card Thermal Baffle 330-3283 of May 2001 is Option 1098.
4. SBus Blank Filler Panel installation guidelines were changed between manual revisions 806-5239-10 and 806-5239-11.

Flash PROM Notes:

1. Use the Flash PROM Programming Utility to update the FCode.
2. Use the prom-copy command ( src dst prom-copy ) to copy a flash PROM.
   ok 2 b prom-copy ( copies from board 2 to board 11 )
3. Use the update-proms command to synchronize the latest version of the flash PROM installed in the system to all boards of the same type.

NVRAM Notes:

1. The Clock Board and I/O Board NVRAMs are automatically synchronized when the Clock Board NVRAM contents matches at least one I/O Board NVRAM.
2. Use the following OBP command to manually synchronize a new or replacement I/O Board to an existing Clock Board:
   ok copy-clock-tod-to-io-boards
3. Use the following OBP command to manually synchronize a new or replacement Clock Board to an existing I/O Board:
   ok (ioboard# in hex) copy-io-board-tod-to-clock-tod

Where to buy:

Documentation:

• Enterprise 3500 System Reference Manual , 805-2630.
• Enterprise 4500/5500/6500 System Reference Manual , 805-2632.
• SBus and Graphics I/O Boards Installation , 805-2704.
• System Flash PROM Programming Guide , 802-5579.
• Filler Panel and Thermal Baffle Installation Guide , 806-5239.